This test runs git rebase "interactively", by faking an edit, and verifies
that the result still makes sense.
+
+Initial setup:
+
+ one - two - three - four (conflict-branch)
+ /
+ A - B - C - D - E (master)
+ | \
+ | F - G - H (branch1)
+ | \
+ |\ I (branch2)
+ | \
+ | J - K - L - M (no-conflict-branch)
+ \
+ N - O - P (no-ff-branch)
+
+ where A, B, D and G all touch file1, and one, two, three, four all
+ touch file "conflict".
'
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-rebase.sh
-set_fake_editor
-
-# Set up the repository like this:
-#
-# one - two - three - four (conflict-branch)
-# /
-# A - B - C - D - E (master)
-# | \
-# | F - G - H (branch1)
-# | \
-# |\ I (branch2)
-# | \
-# | J - K - L - M (no-conflict-branch)
-# \
-# N - O - P (no-ff-branch)
-#
-# where A, B, D and G all touch file1, and one, two, three, four all
-# touch file "conflict".
-#
# WARNING: Modifications to the initial repository can change the SHA ID used
# in the expect2 file for the 'stop on conflicting pick' test.
-
test_expect_success 'setup' '
test_commit A file1 &&
test_commit B file1 &&
test_commit G file1 &&
test_commit H file5 &&
git checkout -b branch2 F &&
- test_commit I file6
+ test_commit I file6 &&
git checkout -b conflict-branch A &&
- for n in one two three four
- do
- test_commit $n conflict
- done &&
+ test_commit one conflict &&
+ test_commit two conflict &&
+ test_commit three conflict &&
+ test_commit four conflict &&
git checkout -b no-conflict-branch A &&
- for n in J K L M
- do
- test_commit $n file$n
- done &&
+ test_commit J fileJ &&
+ test_commit K fileK &&
+ test_commit L fileL &&
+ test_commit M fileM &&
git checkout -b no-ff-branch A &&
- for n in N O P
- do
- test_commit $n file$n
- done
+ test_commit N fileN &&
+ test_commit O fileO &&
+ test_commit P fileP
'
- # "exec" commands are ran with the user shell by default, but this may
+ # "exec" commands are run with the user shell by default, but this may
# be non-POSIX. For example, if SHELL=zsh then ">file" doesn't work
-# to create a file. Unseting SHELL avoids such non-portable behavior
-# in tests.
+# to create a file. Unsetting SHELL avoids such non-portable behavior
+# in tests. It must be exported for it to take effect where needed.
SHELL=
+export SHELL
+
+test_expect_success 'rebase --keep-empty' '
+ git checkout -b emptybranch master &&
+ git commit --allow-empty -m "empty" &&
+ git rebase --keep-empty -i HEAD~2 &&
+ git log --oneline >actual &&
+ test_line_count = 6 actual
+'
test_expect_success 'rebase -i with the exec command' '
git checkout master &&
(
+ set_fake_editor &&
FAKE_LINES="1 exec_>touch-one
2 exec_>touch-two exec_false exec_>touch-three
3 4 exec_>\"touch-file__name_with_spaces\";_>touch-after-semicolon 5" &&
export FAKE_LINES &&
test_must_fail git rebase -i A
) &&
- test -f touch-one &&
- test -f touch-two &&
- ! test -f touch-three &&
- test $(git rev-parse C) = $(git rev-parse HEAD) || {
- echo "Stopped at wrong revision:"
- echo "($(git describe --tags HEAD) instead of C)"
- false
- } &&
+ test_path_is_file touch-one &&
+ test_path_is_file touch-two &&
+ test_path_is_missing touch-three " (should have stopped before)" &&
+ test_cmp_rev C HEAD &&
git rebase --continue &&
- test -f touch-three &&
- test -f "touch-file name with spaces" &&
- test -f touch-after-semicolon &&
- test $(git rev-parse master) = $(git rev-parse HEAD) || {
- echo "Stopped at wrong revision:"
- echo "($(git describe --tags HEAD) instead of master)"
- false
- } &&
+ test_path_is_file touch-three &&
+ test_path_is_file "touch-file name with spaces" &&
+ test_path_is_file touch-after-semicolon &&
+ test_cmp_rev master HEAD &&
rm -f touch-*
'
test_expect_success 'rebase -i with the exec command runs from tree root' '
git checkout master &&
- mkdir subdir && cd subdir &&
+ mkdir subdir && (cd subdir &&
+ set_fake_editor &&
FAKE_LINES="1 exec_>touch-subdir" \
- git rebase -i HEAD^ &&
- cd .. &&
- test -f touch-subdir &&
+ git rebase -i HEAD^
+ ) &&
+ test_path_is_file touch-subdir &&
rm -fr subdir
'
test_expect_success 'rebase -i with the exec command checks tree cleanness' '
git checkout master &&
- (
- FAKE_LINES="exec_echo_foo_>file1 1" &&
- export FAKE_LINES &&
- test_must_fail git rebase -i HEAD^
- ) &&
- test $(git rev-parse master^) = $(git rev-parse HEAD) || {
- echo "Stopped at wrong revision:"
- echo "($(git describe --tags HEAD) instead of master^)"
- false
- } &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" git rebase -i HEAD^ &&
+ test_cmp_rev master^ HEAD &&
git reset --hard &&
git rebase --continue
'
+test_expect_success 'rebase -i with exec of inexistent command' '
+ git checkout master &&
+ test_when_finished "git rebase --abort" &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \
+ git rebase -i HEAD^ >actual 2>&1 &&
+ ! grep "Maybe git-rebase is broken" actual
+'
+
test_expect_success 'no changes are a nop' '
git checkout branch2 &&
+ set_fake_editor &&
git rebase -i F &&
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" &&
test $(git rev-parse I) = $(git rev-parse HEAD)
git checkout -b dead-end &&
git rm file6 &&
git commit -m "stop here" &&
+ set_fake_editor &&
git rebase -i F branch2 &&
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" &&
test $(git rev-parse I) = $(git rev-parse branch2) &&
test_expect_success 'test --onto <branch>' '
git checkout -b test-onto branch2 &&
+ set_fake_editor &&
git rebase -i --onto branch1 F &&
test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" &&
test $(git rev-parse HEAD^) = $(git rev-parse branch1) &&
test_expect_success 'rebase on top of a non-conflicting commit' '
git checkout branch1 &&
git tag original-branch1 &&
+ set_fake_editor &&
git rebase -i branch2 &&
test file6 = $(git diff --name-only original-branch1) &&
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" &&
'
test_expect_success 'exchange two commits' '
+ set_fake_editor &&
FAKE_LINES="2 1" git rebase -i HEAD~2 &&
test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
test G = $(git cat-file commit HEAD | sed -ne \$p)
test_expect_success 'stop on conflicting pick' '
git tag new-branch1 &&
+ set_fake_editor &&
test_must_fail git rebase -i master &&
test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" &&
test_cmp expect .git/rebase-merge/patch &&
git rebase --abort &&
test $(git rev-parse new-branch1) = $(git rev-parse HEAD) &&
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" &&
- ! test -d .git/rebase-merge
+ test_path_is_missing .git/rebase-merge
'
test_expect_success 'abort with error when new base cannot be checked out' '
git rm --cached file1 &&
git commit -m "remove file in base" &&
+ set_fake_editor &&
test_must_fail git rebase -i master > output 2>&1 &&
- grep "Untracked working tree file .file1. would be overwritten" \
+ grep "The following untracked working tree files would be overwritten by checkout:" \
output &&
- ! test -d .git/rebase-merge &&
+ grep "file1" output &&
+ test_path_is_missing .git/rebase-merge &&
git reset --hard HEAD^
'
test_tick &&
GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" &&
git tag twerp &&
+ set_fake_editor &&
git rebase -i --onto master HEAD^ &&
git show HEAD | grep "^Author: Twerp Snog"
'
test_tick &&
GIT_AUTHOR_NAME="Nitfol" git commit -m "nitfol" file7 &&
echo "******************************" &&
+ set_fake_editor &&
FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \
git rebase -i --onto master HEAD~2 &&
test B = $(cat file7) &&
test_expect_success '-p handles "no changes" gracefully' '
HEAD=$(git rev-parse HEAD) &&
+ set_fake_editor &&
git rebase -i -p HEAD^ &&
git update-index --refresh &&
git diff-files --quiet &&
'
test_expect_failure 'exchange two commits with -p' '
+ git checkout H &&
+ set_fake_editor &&
FAKE_LINES="2 1" git rebase -i -p HEAD~2 &&
test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
test G = $(git cat-file commit HEAD | sed -ne \$p)
git commit -m M file1 &&
git checkout -b to-be-rebased &&
test_tick &&
+ set_fake_editor &&
git rebase -i -p --onto branch1 master &&
git update-index --refresh &&
git diff-files --quiet &&
'
test_expect_success 'edit ancestor with -p' '
- FAKE_LINES="1 edit 2 3 4" git rebase -i -p HEAD~3 &&
+ set_fake_editor &&
+ FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 &&
echo 2 > unrelated-file &&
test_tick &&
git commit -m L2-modified --amend unrelated-file &&
test_expect_success '--continue tries to commit' '
test_tick &&
+ set_fake_editor &&
test_must_fail git rebase -i --onto new-branch1 HEAD^ &&
echo resolved > file1 &&
git add file1 &&
'
test_expect_success 'verbose flag is heeded, even after --continue' '
- git reset --hard HEAD@{1} &&
+ git reset --hard master@{1} &&
test_tick &&
+ set_fake_editor &&
test_must_fail git rebase -v -i --onto new-branch1 HEAD^ &&
echo resolved > file1 &&
git add file1 &&
git rebase --continue > output &&
- grep "^ file1 | 2 +-$" output
+ grep "^ file1 | 2 +-$" output
'
test_expect_success 'multi-squash only fires up editor once' '
base=$(git rev-parse HEAD~4) &&
+ set_fake_editor &&
FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \
EXPECT_HEADER_COUNT=4 \
git rebase -i $base &&
test_expect_success 'multi-fixup does not fire up editor' '
git checkout -b multi-fixup E &&
base=$(git rev-parse HEAD~4) &&
+ set_fake_editor &&
FAKE_COMMIT_AMEND="NEVER" FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \
git rebase -i $base &&
test $base = $(git rev-parse HEAD^) &&
test_expect_success 'commit message used after conflict' '
git checkout -b conflict-fixup conflict-branch &&
base=$(git rev-parse HEAD~4) &&
- (
- FAKE_LINES="1 fixup 3 fixup 4" &&
- export FAKE_LINES &&
- test_must_fail git rebase -i $base
- ) &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" git rebase -i $base &&
echo three > conflict &&
git add conflict &&
FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \
test_expect_success 'commit message retained after conflict' '
git checkout -b conflict-squash conflict-branch &&
base=$(git rev-parse HEAD~4) &&
- (
- FAKE_LINES="1 fixup 3 squash 4" &&
- export FAKE_LINES &&
- test_must_fail git rebase -i $base
- ) &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 fixup 3 squash 4" git rebase -i $base &&
echo three > conflict &&
git add conflict &&
FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \
test_expect_success 'squash and fixup generate correct log messages' '
git checkout -b squash-fixup E &&
base=$(git rev-parse HEAD~4) &&
+ set_fake_editor &&
FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 fixup 2 squash 3 fixup 4" \
EXPECT_HEADER_COUNT=4 \
git rebase -i $base &&
test_expect_success 'squash ignores comments' '
git checkout -b skip-comments E &&
base=$(git rev-parse HEAD~4) &&
+ set_fake_editor &&
FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \
EXPECT_HEADER_COUNT=4 \
git rebase -i $base &&
test_expect_success 'squash ignores blank lines' '
git checkout -b skip-blank-lines E &&
base=$(git rev-parse HEAD~4) &&
+ set_fake_editor &&
FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \
EXPECT_HEADER_COUNT=4 \
git rebase -i $base &&
test_expect_success 'squash works as expected' '
git checkout -b squash-works no-conflict-branch &&
one=$(git rev-parse HEAD~3) &&
+ set_fake_editor &&
FAKE_LINES="1 squash 3 2" EXPECT_HEADER_COUNT=2 \
git rebase -i HEAD~3 &&
test $one = $(git rev-parse HEAD~2)
test_expect_success 'interrupted squash works as expected' '
git checkout -b interrupted-squash conflict-branch &&
one=$(git rev-parse HEAD~3) &&
- (
- FAKE_LINES="1 squash 3 2" &&
- export FAKE_LINES &&
- test_must_fail git rebase -i HEAD~3
- ) &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 &&
(echo one; echo two; echo four) > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
test_expect_success 'interrupted squash works as expected (case 2)' '
git checkout -b interrupted-squash2 conflict-branch &&
one=$(git rev-parse HEAD~3) &&
- (
- FAKE_LINES="3 squash 1 2" &&
- export FAKE_LINES &&
- test_must_fail git rebase -i HEAD~3
- ) &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 &&
(echo one; echo four) > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
test $one = $(git rev-parse HEAD~2)
'
-test_expect_success 'ignore patch if in upstream' '
- HEAD=$(git rev-parse HEAD) &&
- git checkout -b has-cherry-picked HEAD^ &&
+test_expect_success '--continue tries to commit, even for "edit"' '
echo unrelated > file7 &&
git add file7 &&
test_tick &&
git commit -m "unrelated change" &&
- git cherry-pick $HEAD &&
- EXPECT_COUNT=1 git rebase -i $HEAD &&
- test $HEAD = $(git rev-parse HEAD^)
-'
-
-test_expect_success '--continue tries to commit, even for "edit"' '
parent=$(git rev-parse HEAD^) &&
test_tick &&
+ set_fake_editor &&
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
echo edited > file7 &&
git add file7 &&
test_expect_success 'aborted --continue does not squash commits after "edit"' '
old=$(git rev-parse HEAD) &&
test_tick &&
+ set_fake_editor &&
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
echo "edited again" > file7 &&
git add file7 &&
- (
- FAKE_COMMIT_MESSAGE=" " &&
- export FAKE_COMMIT_MESSAGE &&
- test_must_fail git rebase --continue
- ) &&
+ test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue &&
test $old = $(git rev-parse HEAD) &&
git rebase --abort
'
test_expect_success 'auto-amend only edited commits after "edit"' '
test_tick &&
+ set_fake_editor &&
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
echo "edited again" > file7 &&
git add file7 &&
echo "and again" > file7 &&
git add file7 &&
test_tick &&
- (
- FAKE_COMMIT_MESSAGE="and again" &&
- export FAKE_COMMIT_MESSAGE &&
- test_must_fail git rebase --continue
- ) &&
+ test_must_fail env FAKE_COMMIT_MESSAGE="and again" git rebase --continue &&
git rebase --abort
'
+test_expect_success 'clean error after failed "exec"' '
+ test_tick &&
+ test_when_finished "git rebase --abort || :" &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ &&
+ echo "edited again" > file7 &&
+ git add file7 &&
+ test_must_fail git rebase --continue 2>error &&
+ grep "You have staged changes in your working tree." error
+'
+
test_expect_success 'rebase a detached HEAD' '
grandparent=$(git rev-parse HEAD~2) &&
git checkout $(git rev-parse HEAD) &&
test_tick &&
+ set_fake_editor &&
FAKE_LINES="2 1" git rebase -i HEAD~2 &&
test $grandparent = $(git rev-parse HEAD~2)
'
test_expect_success 'rebase a commit violating pre-commit' '
mkdir -p .git/hooks &&
- PRE_COMMIT=.git/hooks/pre-commit &&
- echo "#!/bin/sh" > $PRE_COMMIT &&
- echo "test -z \"\$(git diff --cached --check)\"" >> $PRE_COMMIT &&
- chmod a+x $PRE_COMMIT &&
+ write_script .git/hooks/pre-commit <<-\EOF &&
+ test -z "$(git diff --cached --check)"
+ EOF
echo "monde! " >> file1 &&
test_tick &&
test_must_fail git commit -m doesnt-verify file1 &&
git commit -m doesnt-verify --no-verify file1 &&
test_tick &&
+ set_fake_editor &&
FAKE_LINES=2 git rebase -i HEAD~2
'
git commit -m "Add body"
) &&
+ set_fake_editor &&
FAKE_LINES="1 squash 2" git rebase -i to-be-rebased &&
test "$(git show -s --pretty=format:%an)" = "Squashed Away"
git checkout -b branch4 HEAD &&
GIT_EDITOR=: git commit --amend \
- --author="Somebody else <somebody@else.com>"
+ --author="Somebody else <somebody@else.com>" &&
test $(git rev-parse branch3) != $(git rev-parse branch4) &&
+ set_fake_editor &&
git rebase -i branch3 &&
test $(git rev-parse branch3) = $(git rev-parse branch4)
git add elif && git commit -m "submodule initial"
) &&
echo 1 >file1 &&
- git add file1 sub
+ git add file1 sub &&
test_tick &&
git commit -m "One" &&
echo 2 >file1 &&
git commit -a -m "submodule second"
) &&
test_tick &&
+ set_fake_editor &&
git commit -a -m "Three changes submodule"
'
test_expect_success 'submodule rebase -i' '
+ set_fake_editor &&
FAKE_LINES="1 squash 2 3" git rebase -i A
'
+test_expect_success 'submodule conflict setup' '
+ git tag submodule-base &&
+ git checkout HEAD^ &&
+ (
+ cd sub && git checkout HEAD^ && echo 4 >elif &&
+ git add elif && git commit -m "submodule conflict"
+ ) &&
+ git add sub &&
+ test_tick &&
+ git commit -m "Conflict in submodule" &&
+ git tag submodule-topic
+'
+
+test_expect_success 'rebase -i continue with only submodule staged' '
+ set_fake_editor &&
+ test_must_fail git rebase -i submodule-base &&
+ git add sub &&
+ git rebase --continue &&
+ test $(git rev-parse submodule-base) != $(git rev-parse HEAD)
+'
+
+test_expect_success 'rebase -i continue with unstaged submodule' '
+ git checkout submodule-topic &&
+ git reset --hard &&
+ set_fake_editor &&
+ test_must_fail git rebase -i submodule-base &&
+ git reset &&
+ git rebase --continue &&
+ test $(git rev-parse submodule-base) = $(git rev-parse HEAD)
+'
+
test_expect_success 'avoid unnecessary reset' '
git checkout master &&
+ git reset --hard &&
test-chmtime =123456789 file3 &&
git update-index --refresh &&
HEAD=$(git rev-parse HEAD) &&
+ set_fake_editor &&
git rebase -i HEAD~4 &&
test $HEAD = $(git rev-parse HEAD) &&
MTIME=$(test-chmtime -v +0 file3 | sed 's/[^0-9].*$//') &&
test_expect_success 'reword' '
git checkout -b reword-branch master &&
+ set_fake_editor &&
FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" git rebase -i A &&
git show HEAD | grep "E changed" &&
test $(git rev-parse master) != $(git rev-parse HEAD) &&
test_commit n2 &&
test_commit n3 &&
git notes add -m"a note" n3 &&
- git rebase --onto n1 n2 &&
+ set_fake_editor &&
+ git rebase -i --onto n1 n2 &&
test "a note" = "$(git notes show HEAD)"
'
cat >expect <<EOF
an earlier note
+
a note
EOF
test_expect_success 'rebase -i can copy notes over a fixup' '
git reset --hard n3 &&
git notes add -m"an earlier note" n2 &&
+ set_fake_editor &&
GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 fixup 2" git rebase -i n1 &&
git notes show > output &&
test_cmp expect output
git symbolic-ref HEAD &&
grandparent=$(git rev-parse HEAD~2) &&
test_tick &&
+ set_fake_editor &&
FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 &&
test $grandparent = $(git rev-parse HEAD~2) &&
test_must_fail git symbolic-ref HEAD
test_expect_success 'always cherry-pick with --no-ff' '
git checkout no-ff-branch &&
git tag original-no-ff-branch &&
+ set_fake_editor &&
git rebase -i --no-ff A &&
touch empty &&
for p in 0 1 2
git commit -a -m "end with slash\\" &&
echo >>file1 &&
test_tick &&
+ git commit -a -m "something (\000) that looks like octal" &&
+ echo >>file1 &&
+ test_tick &&
+ git commit -a -m "something (\n) that looks like a newline" &&
+ echo >>file1 &&
+ test_tick &&
git commit -a -m "another commit"
'
test_expect_success 'rebase-i history with funny messages' '
git rev-list A..funny >expect &&
test_tick &&
- FAKE_LINES="1 2" git rebase -i A &&
+ set_fake_editor &&
+ FAKE_LINES="1 2 3 4" git rebase -i A &&
git rev-list A.. >actual &&
test_cmp expect actual
'
+test_expect_success 'prepare for rebase -i --exec' '
+ git checkout master &&
+ git checkout -b execute &&
+ test_commit one_exec main.txt one_exec &&
+ test_commit two_exec main.txt two_exec &&
+ test_commit three_exec main.txt three_exec
+'
+
+test_expect_success 'running "git rebase -i --exec git show HEAD"' '
+ set_fake_editor &&
+ git rebase -i --exec "git show HEAD" HEAD~2 >actual &&
+ (
+ FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
+ export FAKE_LINES &&
+ git rebase -i HEAD~2 >expect
+ ) &&
+ sed -e "1,9d" expect >expected &&
+ test_cmp expected actual
+'
+
+test_expect_success 'running "git rebase --exec git show HEAD -i"' '
+ git reset --hard execute &&
+ set_fake_editor &&
+ git rebase --exec "git show HEAD" -i HEAD~2 >actual &&
+ (
+ FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
+ export FAKE_LINES &&
+ git rebase -i HEAD~2 >expect
+ ) &&
+ sed -e "1,9d" expect >expected &&
+ test_cmp expected actual
+'
+
+test_expect_success 'running "git rebase -ix git show HEAD"' '
+ git reset --hard execute &&
+ set_fake_editor &&
+ git rebase -ix "git show HEAD" HEAD~2 >actual &&
+ (
+ FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
+ export FAKE_LINES &&
+ git rebase -i HEAD~2 >expect
+ ) &&
+ sed -e "1,9d" expect >expected &&
+ test_cmp expected actual
+'
+
+
+test_expect_success 'rebase -ix with several <CMD>' '
+ git reset --hard execute &&
+ set_fake_editor &&
+ git rebase -ix "git show HEAD; pwd" HEAD~2 >actual &&
+ (
+ FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" &&
+ export FAKE_LINES &&
+ git rebase -i HEAD~2 >expect
+ ) &&
+ sed -e "1,9d" expect >expected &&
+ test_cmp expected actual
+'
+
+test_expect_success 'rebase -ix with several instances of --exec' '
+ git reset --hard execute &&
+ set_fake_editor &&
+ git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual &&
+ (
+ FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2
+ exec_git_show_HEAD exec_pwd" &&
+ export FAKE_LINES &&
+ git rebase -i HEAD~2 >expect
+ ) &&
+ sed -e "1,11d" expect >expected &&
+ test_cmp expected actual
+'
+
+test_expect_success 'rebase -ix with --autosquash' '
+ git reset --hard execute &&
+ git checkout -b autosquash &&
+ echo second >second.txt &&
+ git add second.txt &&
+ git commit -m "fixup! two_exec" &&
+ echo bis >bis.txt &&
+ git add bis.txt &&
+ git commit -m "fixup! two_exec" &&
+ set_fake_editor &&
+ (
+ git checkout -b autosquash_actual &&
+ git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual
+ ) &&
+ git checkout autosquash &&
+ (
+ git checkout -b autosquash_expected &&
+ FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
+ export FAKE_LINES &&
+ git rebase -i HEAD~4 >expect
+ ) &&
+ sed -e "1,13d" expect >expected &&
+ test_cmp expected actual
+'
+
+test_expect_success 'rebase --exec works without -i ' '
+ git reset --hard execute &&
+ rm -rf exec_output &&
+ EDITOR="echo >invoked_editor" git rebase --exec "echo a line >>exec_output" HEAD~2 2>actual &&
+ test_i18ngrep "Successfully rebased and updated" actual &&
+ test_line_count = 2 exec_output &&
+ test_path_is_missing invoked_editor
+'
+
+test_expect_success 'rebase -i --exec without <CMD>' '
+ git reset --hard execute &&
+ set_fake_editor &&
+ test_must_fail git rebase -i --exec 2>tmp &&
+ sed -e "1d" tmp >actual &&
+ test_must_fail git rebase -h >expected &&
+ test_cmp expected actual &&
+ git checkout master
+'
+
+test_expect_success 'rebase -i --root re-order and drop commits' '
+ git checkout E &&
+ set_fake_editor &&
+ FAKE_LINES="3 1 2 5" git rebase -i --root &&
+ test E = $(git cat-file commit HEAD | sed -ne \$p) &&
+ test B = $(git cat-file commit HEAD^ | sed -ne \$p) &&
+ test A = $(git cat-file commit HEAD^^ | sed -ne \$p) &&
+ test C = $(git cat-file commit HEAD^^^ | sed -ne \$p) &&
+ test 0 = $(git cat-file commit HEAD^^^ | grep -c ^parent\ )
+'
+
+test_expect_success 'rebase -i --root retain root commit author and message' '
+ git checkout A &&
+ echo B >file7 &&
+ git add file7 &&
+ GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" &&
+ set_fake_editor &&
+ FAKE_LINES="2" git rebase -i --root &&
+ git cat-file commit HEAD | grep -q "^author Twerp Snog" &&
+ git cat-file commit HEAD | grep -q "^different author$"
+'
+
+test_expect_success 'rebase -i --root temporary sentinel commit' '
+ git checkout B &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="2" git rebase -i --root &&
+ git cat-file commit HEAD | grep "^tree 4b825dc642cb" &&
+ git rebase --abort
+'
+
+test_expect_success 'rebase -i --root fixup root commit' '
+ git checkout B &&
+ set_fake_editor &&
+ FAKE_LINES="1 fixup 2" git rebase -i --root &&
+ test A = $(git cat-file commit HEAD | sed -ne \$p) &&
+ test B = $(git show HEAD:file1) &&
+ test 0 = $(git cat-file commit HEAD | grep -c ^parent\ )
+'
+
+test_expect_success 'rebase --edit-todo does not works on non-interactive rebase' '
+ git reset --hard &&
+ git checkout conflict-branch &&
+ set_fake_editor &&
+ test_must_fail git rebase --onto HEAD~2 HEAD~ &&
+ test_must_fail git rebase --edit-todo &&
+ git rebase --abort
+'
+
+test_expect_success 'rebase --edit-todo can be used to modify todo' '
+ git reset --hard &&
+ git checkout no-conflict-branch^0 &&
+ set_fake_editor &&
+ FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 &&
+ FAKE_LINES="2 1" git rebase --edit-todo &&
+ git rebase --continue &&
+ test M = $(git cat-file commit HEAD^ | sed -ne \$p) &&
+ test L = $(git cat-file commit HEAD | sed -ne \$p)
+'
+
+test_expect_success 'rebase -i produces readable reflog' '
+ git reset --hard &&
+ git branch -f branch-reflog-test H &&
+ set_fake_editor &&
+ git rebase -i --onto I F branch-reflog-test &&
+ cat >expect <<-\EOF &&
+ rebase -i (finish): returning to refs/heads/branch-reflog-test
+ rebase -i (pick): H
+ rebase -i (pick): G
+ rebase -i (start): checkout I
+ EOF
+ git reflog -n4 HEAD |
+ sed "s/[^:]*: //" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'rebase -i respects core.commentchar' '
+ git reset --hard &&
+ git checkout E^0 &&
+ test_config core.commentchar "\\" &&
+ write_script remove-all-but-first.sh <<-\EOF &&
+ sed -e "2,\$s/^/\\\\/" "$1" >"$1.tmp" &&
+ mv "$1.tmp" "$1"
+ EOF
+ test_set_editor "$(pwd)/remove-all-but-first.sh" &&
+ git rebase -i B &&
+ test B = $(git cat-file commit HEAD^ | sed -ne \$p)
+'
+
+test_expect_success 'rebase -i, with <onto> and <upstream> specified as :/quuxery' '
+ test_when_finished "git branch -D torebase" &&
+ git checkout -b torebase branch1 &&
+ upstream=$(git rev-parse ":/J") &&
+ onto=$(git rev-parse ":/A") &&
+ git rebase --onto $onto $upstream &&
+ git reset --hard branch1 &&
+ git rebase --onto ":/A" ":/J" &&
+ git checkout branch1
+'
+
+test_expect_success 'rebase -i with --strategy and -X' '
+ git checkout -b conflict-merge-use-theirs conflict-branch &&
+ git reset --hard HEAD^ &&
+ echo five >conflict &&
+ echo Z >file1 &&
+ git commit -a -m "one file conflict" &&
+ EDITOR=true git rebase -i --strategy=recursive -Xours conflict-branch &&
+ test $(git show conflict-branch:conflict) = $(cat conflict) &&
+ test $(cat file1) = Z
+'
+
+test_expect_success 'interrupted rebase -i with --strategy and -X' '
+ git checkout -b conflict-merge-use-theirs-interrupted conflict-branch &&
+ git reset --hard HEAD^ &&
+ >breakpoint &&
+ git add breakpoint &&
+ git commit -m "breakpoint for interactive mode" &&
+ echo five >conflict &&
+ echo Z >file1 &&
+ git commit -a -m "one file conflict" &&
+ set_fake_editor &&
+ FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive -Xours conflict-branch &&
+ git rebase --continue &&
+ test $(git show conflict-branch:conflict) = $(cat conflict) &&
+ test $(cat file1) = Z
+'
+
+test_expect_success 'rebase -i error on commits with \ in message' '
+ current_head=$(git rev-parse HEAD) &&
+ test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" &&
+ test_commit TO-REMOVE will-conflict old-content &&
+ test_commit "\temp" will-conflict new-content dummy &&
+ test_must_fail env EDITOR=true git rebase -i HEAD^ --onto HEAD^^ 2>error &&
+ test_expect_code 1 grep " emp" error
+'
+
+test_expect_success 'short SHA-1 setup' '
+ test_when_finished "git checkout master" &&
+ git checkout --orphan collide &&
+ git rm -rf . &&
+ (
+ unset test_tick &&
+ test_commit collide1 collide &&
+ test_commit --notick collide2 collide &&
+ test_commit --notick collide3 collide
+ )
+'
+
+test_expect_success 'short SHA-1 collide' '
+ test_when_finished "reset_rebase && git checkout master" &&
+ git checkout collide &&
+ (
+ unset test_tick &&
+ test_tick &&
+ set_fake_editor &&
+ FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \
+ FAKE_LINES="reword 1 2" git rebase -i HEAD~2
+ )
+'
+
+test_expect_success 'respect core.abbrev' '
+ git config core.abbrev 12 &&
+ set_cat_todo_editor &&
+ test_must_fail git rebase -i HEAD~4 >todo-list &&
+ test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list)
+'
+
+test_expect_success 'todo count' '
+ write_script dump-raw.sh <<-\EOF &&
+ cat "$1"
+ EOF
+ test_set_editor "$(pwd)/dump-raw.sh" &&
+ git rebase -i HEAD~4 >actual &&
+ grep "^# Rebase ..* onto ..* ([0-9]" actual
+'
+
+test_expect_success 'rebase -i commits that overwrite untracked files (pick)' '
+ git checkout --force branch2 &&
+ git clean -f &&
+ set_fake_editor &&
+ FAKE_LINES="edit 1 2" git rebase -i A &&
+ test_cmp_rev HEAD F &&
+ test_path_is_missing file6 &&
+ >file6 &&
+ test_must_fail git rebase --continue &&
+ test_cmp_rev HEAD F &&
+ rm file6 &&
+ git rebase --continue &&
+ test_cmp_rev HEAD I
+'
+
+test_expect_success 'rebase -i commits that overwrite untracked files (squash)' '
+ git checkout --force branch2 &&
+ git clean -f &&
+ git tag original-branch2 &&
+ set_fake_editor &&
+ FAKE_LINES="edit 1 squash 2" git rebase -i A &&
+ test_cmp_rev HEAD F &&
+ test_path_is_missing file6 &&
+ >file6 &&
+ test_must_fail git rebase --continue &&
+ test_cmp_rev HEAD F &&
+ rm file6 &&
+ git rebase --continue &&
+ test $(git cat-file commit HEAD | sed -ne \$p) = I &&
+ git reset --hard original-branch2
+'
+
+test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' '
+ git checkout --force branch2 &&
+ git clean -f &&
+ set_fake_editor &&
+ FAKE_LINES="edit 1 2" git rebase -i --no-ff A &&
+ test $(git cat-file commit HEAD | sed -ne \$p) = F &&
+ test_path_is_missing file6 &&
+ >file6 &&
+ test_must_fail git rebase --continue &&
+ test $(git cat-file commit HEAD | sed -ne \$p) = F &&
+ rm file6 &&
+ git rebase --continue &&
+ test $(git cat-file commit HEAD | sed -ne \$p) = I
+'
+
+test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' '
+ git checkout -b commit-to-skip &&
+ for double in X 3 1
+ do
+ test_seq 5 | sed "s/$double/&&/" >seq &&
+ git add seq &&
+ test_tick &&
+ git commit -m seq-$double
+ done &&
+ git tag seq-onto &&
+ git reset --hard HEAD~2 &&
+ git cherry-pick seq-onto &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES= git rebase -i seq-onto &&
+ test -d .git/rebase-merge &&
+ git rebase --continue &&
+ git diff --exit-code seq-onto &&
+ test ! -d .git/rebase-merge &&
+ test ! -f .git/CHERRY_PICK_HEAD
+'
+
+rebase_setup_and_clean () {
+ test_when_finished "
+ git checkout master &&
+ test_might_fail git branch -D $1 &&
+ test_might_fail git rebase --abort
+ " &&
+ git checkout -b $1 master
+}
+
+test_expect_success 'drop' '
+ rebase_setup_and_clean drop-test &&
+ set_fake_editor &&
+ FAKE_LINES="1 drop 2 3 drop 4 5" git rebase -i --root &&
+ test E = $(git cat-file commit HEAD | sed -ne \$p) &&
+ test C = $(git cat-file commit HEAD^ | sed -ne \$p) &&
+ test A = $(git cat-file commit HEAD^^ | sed -ne \$p)
+'
+
+cat >expect <<EOF
+Successfully rebased and updated refs/heads/missing-commit.
+EOF
+
+test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' '
+ test_config rebase.missingCommitsCheck ignore &&
+ rebase_setup_and_clean missing-commit &&
+ set_fake_editor &&
+ FAKE_LINES="1 2 3 4" \
+ git rebase -i --root 2>actual &&
+ test D = $(git cat-file commit HEAD | sed -ne \$p) &&
+ test_cmp expect actual
+'
+
+cat >expect <<EOF
+Warning: some commits may have been dropped accidentally.
+Dropped commits (newer to older):
+ - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
+To avoid this message, use "drop" to explicitly remove a commit.
+
+Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
+The possible behaviours are: ignore, warn, error.
+
+Successfully rebased and updated refs/heads/missing-commit.
+EOF
+
+test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' '
+ test_config rebase.missingCommitsCheck warn &&
+ rebase_setup_and_clean missing-commit &&
+ set_fake_editor &&
+ FAKE_LINES="1 2 3 4" \
+ git rebase -i --root 2>actual &&
+ test_cmp expect actual &&
+ test D = $(git cat-file commit HEAD | sed -ne \$p)
+'
+
+cat >expect <<EOF
+Warning: some commits may have been dropped accidentally.
+Dropped commits (newer to older):
+ - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
+ - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2)
+To avoid this message, use "drop" to explicitly remove a commit.
+
+Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
+The possible behaviours are: ignore, warn, error.
+
+You can fix this with 'git rebase --edit-todo'.
+Or you can abort the rebase with 'git rebase --abort'.
+EOF
+
+test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' '
+ test_config rebase.missingCommitsCheck error &&
+ rebase_setup_and_clean missing-commit &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 2 4" \
+ git rebase -i --root 2>actual &&
+ test_cmp expect actual &&
+ cp .git/rebase-merge/git-rebase-todo.backup \
+ .git/rebase-merge/git-rebase-todo &&
+ FAKE_LINES="1 2 drop 3 4 drop 5" \
+ git rebase --edit-todo &&
+ git rebase --continue &&
+ test D = $(git cat-file commit HEAD | sed -ne \$p) &&
+ test B = $(git cat-file commit HEAD^ | sed -ne \$p)
+'
+
+cat >expect <<EOF
+Warning: the command isn't recognized in the following line:
+ - badcmd $(git rev-list --oneline -1 master~1)
+
+You can fix this with 'git rebase --edit-todo'.
+Or you can abort the rebase with 'git rebase --abort'.
+EOF
+
+test_expect_success 'static check of bad command' '
+ rebase_setup_and_clean bad-cmd &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \
+ git rebase -i --root 2>actual &&
+ test_cmp expect actual &&
+ FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo &&
+ git rebase --continue &&
+ test E = $(git cat-file commit HEAD | sed -ne \$p) &&
+ test C = $(git cat-file commit HEAD^ | sed -ne \$p)
+'
+
+test_expect_success 'tabs and spaces are accepted in the todolist' '
+ rebase_setup_and_clean indented-comment &&
+ write_script add-indent.sh <<-\EOF &&
+ (
+ # Turn single spaces into space/tab mix
+ sed "1s/ / /g; 2s/ / /g; 3s/ / /g" "$1"
+ printf "\n\t# comment\n #more\n\t # comment\n"
+ ) >"$1.new"
+ mv "$1.new" "$1"
+ EOF
+ test_set_editor "$(pwd)/add-indent.sh" &&
+ git rebase -i HEAD^^^ &&
+ test E = $(git cat-file commit HEAD | sed -ne \$p)
+'
+
+cat >expect <<EOF
+Warning: the SHA-1 is missing or isn't a commit in the following line:
+ - edit XXXXXXX False commit
+
+You can fix this with 'git rebase --edit-todo'.
+Or you can abort the rebase with 'git rebase --abort'.
+EOF
+
+test_expect_success 'static check of bad SHA-1' '
+ rebase_setup_and_clean bad-sha &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \
+ git rebase -i --root 2>actual &&
+ test_cmp expect actual &&
+ FAKE_LINES="1 2 4 5 6" git rebase --edit-todo &&
+ git rebase --continue &&
+ test E = $(git cat-file commit HEAD | sed -ne \$p)
+'
+
+test_expect_success 'editor saves as CR/LF' '
+ git checkout -b with-crlf &&
+ write_script add-crs.sh <<-\EOF &&
+ sed -e "s/\$/Q/" <"$1" | tr Q "\\015" >"$1".new &&
+ mv -f "$1".new "$1"
+ EOF
+ (
+ test_set_editor "$(pwd)/add-crs.sh" &&
+ git rebase -i HEAD^
+ )
+'
+
test_done