t5540/5541: smart-http does not support "--force-with-lease"
The push() method in remote-curl.c is not told and does not pass the
necessary information to underlying send-pack, so this extension
does not yet work. Leave a note in the test suite.
log: use true parents for diff even when rewriting
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: add generic callback wrapper to parse section.<url>.key
Existing configuration parsing functions (e.g. http_options() in
http.c) know how to parse two-level configuration variable names.
We would like to exploit them and parse something like this:
and pretend as if http.sslVerify were set to false when talking to
"https://weak.example.com/path".
Introduce `urlmatch_config_entry()` wrapper that:
- is called with the target URL (e.g. "https://weak.example.com/path"),
and the two-level variable parser (e.g. `http_options`);
- uses `url_normalize()` and `match_urls()` to see if configuration
data matches the target URL; and
- calls the traditional two-level configuration variable parser
only for the configuration data whose <url> part matches the
target URL (and if there are multiple matches, only do so if the
current match is a better match than the ones previously seen).
Some http.* configuration variables need to take values customized
for the URL we are talking to. We may want to set http.sslVerify to
true in general but to false only for a certain site, for example,
with a configuration file like this:
and let the configuration machinery pick up the latter only when
talking to "https://weak.example.com". The latter needs to kick in
not only when the URL is exactly "https://weak.example.com", but
also is anything that "match" it, e.g.
The <url> in the configuration key consists of the following parts,
and is considered a match to the URL we are attempting to access
under certain conditions:
. Scheme (e.g., `https` in `https://example.com/`). This field
must match exactly between the config key and the URL.
. Host/domain name (e.g., `example.com` in `https://example.com/`).
This field must match exactly between the config key and the URL.
. Port number (e.g., `8080` in `http://example.com:8080/`). This
field must match exactly between the config key and the URL.
Omitted port numbers are automatically converted to the correct
default for the scheme before matching.
. Path (e.g., `repo.git` in `https://example.com/repo.git`). The
path field of the config key must match the path field of the
URL either exactly or as a prefix of slash-delimited path
elements. A config key with path `foo/` matches URL path
`foo/bar`. A prefix can only match on a slash (`/`) boundary.
Longer matches take precedence (so a config key with path
`foo/bar` is a better match to URL path `foo/bar` than a config
key with just path `foo/`).
. User name (e.g., `me` in `https://me@example.com/repo.git`). If
the config key has a user name, it must match the user name in
the URL exactly. If the config key does not have a user name,
that config key will match a URL with any user name (including
none), but at a lower precedence than a config key with a user
name.
Longer matches take precedence over shorter matches.
This step adds two helper functions `url_normalize()` and
`match_urls()` to help implement the above semantics. The
normalization rules are based on RFC 3986 and should result in any
two equivalent urls being a match.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http.c: fix parsing of http.sslCertPasswordProtected variable
The existing code triggers only when the configuration variable is
set to true. Once the variable is set to true in a more generic
configuration file (e.g. ~/.gitconfig), it cannot be overriden to
false in the repository specific one (e.g. .git/config).
Add the new is_staging_gitmodules_ok() and stage_updated_gitmodules()
functions to submodule.c. The first makes it possible for call sites to
see if the .gitmodules file did contain any unstaged modifications they
would accidentally stage in addition to those they intend to stage
themselves. The second function stages all modifications to the
.gitmodules file, both will be used by subsequent patches for the mv
and rm commands.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mv: move submodules together with their work trees
Currently the attempt to use "git mv" on a submodule errors out with:
fatal: source directory is empty, source=<src>, destination=<dest>
The reason is that mv searches for the submodule with a trailing slash in
the index, which it doesn't find (because it is stored without a trailing
slash). As it doesn't find any index entries inside the submodule it
claims the directory would be empty even though it isn't.
Fix that by searching for the name without a trailing slash and continue
if it is a submodule. Then rename() will move the submodule work tree just
like it moves a file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: add http.savecookies option to write out HTTP cookies
HTTP servers may send Set-Cookie headers in a response and expect them
to be set on subsequent requests. By default, libcurl behavior is to
store such cookies in memory and reuse them across requests within a
single session. However, it may also make sense, depending on the
server and the cookies, to store them across sessions. Provide users
an option to enable this behavior, writing cookies out to the same
file specified in http.cookiefile.
Signed-off-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: use Apple's Security framework for base64 encoding
Use Apple's supported functions for base64 encoding instead
of the deprecated OpenSSL functions.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By rewriting the loop that formats the argv[] in cmd_tar_tree()
function using sq_quote_argv() for code simplicity, the last use of
sq_quote_print() goes away.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The print_value() function in for-each-ref.c prints values to stdout
immediately using {sq|perl|python|tcl}_quote_print(). Change these
lower-level quote functions to instead leave their results in strbuf
so that we can later add post-processing to the results of them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the libexec directory doesn't exist, git-subtree gets installed as
$prefix/share/libexec/git-core file. This patch creates the directory
before installing git-subtree file into it.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By improving the relative_path() algorithm, e02ca72 (path.c:
refactor relative_path(), not only strip prefix, 2013-06-25)
uncovered a latent bug in Emacs. While most editor applications
like cat and vim handle non-canonicalized relative paths fine, emacs
does not. This is due to a long-standing bug in emacs, where it
refuses to resolve symlinks in the supplied path:
#!/bin/sh
cd /tmp
mkdir z z/a z/b
echo moodle >z/a/file
ln -s z/b
cd b
emacs ../a/file # fail: attempts to open /tmp/a/file
Even if emacs were to be patched to fix this bug, it may be nicer to
help users running older versions.
Note that this can potentially regress for users of all editors,
when they ask "what file am I editing?" to the editor, as it is
likely to answer with an unsightly long full path.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-slab.h: Fix memory allocation and addressing
The slab initialization code includes the calculation of the
slab 'elem_size', which is in turn used to determine the size
(capacity) of the slab. Each element of the slab represents an
array, of length 'stride', of 'elemtype'. (Note that it may be
clearer if the define_commit_slab macro parameter was called
'basetype' rather than 'elemtype'). However, the 'elem_size'
calculation incorrectly uses 'sizeof(struct slabname)' in the
expression, rather than 'sizeof(elemtype)'.
Within the slab access routine, <slabname>_at(), the given commit
'index' is transformed into an (slab#, slot#) pair used to address
the required element (a pointer to the first element of the array
of 'elemtype' associated with that commit). The current code to
calculate these address coordinates multiplies the commit index
by the 'stride' which, at least for the slab#, produces the wrong
result. Using the commit index directly, without scaling by the
'stride', produces the correct 'logical' address.
Also, when allocating a new slab, the size of the allocation only
allows for a slab containing elements of single element arrays of
'elemtype'. This should allow for elements of an array of length
'stride' of 'elemtype'. In order to fix this, we need to change
the element size parameter to xcalloc() by multiplying the current
element size (sizeof(**s->slab)) by the s->stride.
Having changed the calculation of the slot#, we now need to convert
the logical 'nth_slot', by scaling with s->stride, into the correct
physical address.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: tweak empty cherry pick advice for sequencer
When we refuse to make an empty commit, we check whether we
are in a cherry-pick in order to give better advice on how
to proceed. We instruct the user to repeat the commit with
"--allow-empty" to force the commit, or to use "git reset"
to skip it and abort the cherry-pick.
In the case of a single cherry-pick, the distinction between
skipping and aborting is not important, as there is no more
work to be done afterwards. When we are using the sequencer
to cherry pick a series of commits, though, the instruction
is confusing: does it skip this commit, or does it abort the
rest of the cherry-pick?
It does skip, after which the user can continue the
cherry-pick. This is the right thing to be advising the user
to do, but let's make it more clear what will happen, both
by using the word "skip", and by mentioning that the rest of
the sequence can be continued via "cherry-pick --continue"
(whether we skip or take the commit).
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs/git-tag: explain lightweight versus annotated tags
Stress the difference between the two with a suggestion on
when the user should use one in place of the other.
Signed-off-by: Daniele Segato <daniele.segato@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --global section of git-config(1) currently reads like:
For writing options: write to global /.gitconfig file rather than the
^
start tilde
repository .git/config, write to $XDG_CONFIG_HOME/git/config file if
this file exists and the/.gitconfig file doesn’t.
^
end tilde
Instead of tilde (~) being interpreted literally, asciidoc subscripts
the text between the two tildes. To fix this problem, use backticks (`)
to quote all the paths in the file uniformly, just like config.txt does.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/rm.c: consolidate error reporting for removing submodules
We have two (not identical) copies of error reporting when
attempting to remove submodules that have their repositories
embedded within them. Add a helper function so that we do not have
to repeat similar error messages with subtly different wording
without a good reason.
We mention twice that the from_ident field of struct
pretty_print_context is internal.
The first comment was added by 10f2fbf, which prepares the
struct for internal fields, and then the second by a908047,
which actually adds such a field. This was a mistake made
when re-rolling the series on the list; the comment should
have been removed from the latter commit.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A helper to read from a set of format-patch output files or a range
of commits and find those who may have insights to the code that
the changes touch by running a series of "git blame" commands.
* es/contacts:
contrib: contacts: add documentation
contrib: contacts: add mailmap support
contrib: contacts: interpret committish akin to format-patch
contrib: contacts: add ability to parse from committish
contrib: add git-contacts helper
The tip one does _not_ revert c869753e (Force core.filemode to
false on Cygwin., 2006-12-30) on purpose, so that people can
still retain the old behaviour if they wanted to.
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
On systems that understand a CRLF as a line ending, tests in this
script that worked on files with CRLF line endings using "grep" to
extract matching lines may lose the CR at the end of lines that
match, causing the actual output not to match the expected output.
* ml/avoid-using-grep-on-crlf-files:
test-lib.sh - define and use GREP_STRIPS_CR
* sb/misc-fixes:
diff.c: Do not initialize a variable, which gets reassigned anyway.
commit: Fix a memory leak in determine_author_info
daemon.c:handle: Remove unneeded check for null pointer.
* tr/line-log:
t4211: fix incorrect rebase at f8395edc (range-set: satisfy non-empty ranges invariant)
line-log: fix "log -LN" crash when N is last line of file
range-set: satisfy non-empty ranges invariant
t4211: demonstrate crash when first -L encountered is empty range
t4211: demonstrate empty -L range crash
range-set: fix sort_and_merge_range_set() corner case bug
git-clean: implement partial matching for selection
Document for interactive git-clean says: "You also could say `c` or
`clean` above as long as the choice is unique". But it's not true,
because only hotkey `c` and full match (`clean`) could work.
Implement partial matching via find_unique function to make the
document right.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added in ff5effd (include agent identifier in
capability string, 2012-08-03), but neither the syntax nor
the semantics were ever documented outside of the commit
message.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: note that receive-pack knows side-band-64k capability
The protocol-capabilities documentation notes that any
capabilities not explicitly mentioned for receive-pack work
only for upload-pack.
Receive-pack has advertised and understood side-band-64k
since 38a81b4 (receive-pack: Wrap status reports inside
side-band-64k, 2010-02-05), but we do not mention it
explicitly. Let's do so.
Note that receive-pack does not understand side-band, which
was obsolete by that point.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-completion.bash: replace zsh notation that breaks bash 3.X
50c5885e (git-completion.bash: replace zsh notation that breaks bash
3.X, 2013-01-18) fixed a zsh-ism introduced earlier to append to an
array, which older versions of bash (3.0) did not grok. This was
again broken by 734b2f05 (completion: synchronize zsh wrapper,
2013-05-08).
Cherry-pick the fix again to let those with older bash use the
completion script.
Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
smart http: use the same connectivity check on cloning
This is an extension of c6807a4 (clone: open a shortcut for
connectivity check - 2013-05-26) to reduce the cost of connectivity
check at clone time, this time with smart http protocol.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'es/line-log-further-fixes' into tr/line-log
* es/line-log-further-fixes:
line-log: fix "log -LN" crash when N is last line of file
range-set: satisfy non-empty ranges invariant
t4211: demonstrate crash when first -L encountered is empty range
t4211: demonstrate empty -L range crash
range-set: fix sort_and_merge_range_set() corner case bug
range_set: fix coalescing bug when range is a subset of another
t4211: fix broken test when one -L range is subset of another
line-log: fix "log -LN" crash when N is last line of file
range-set invariants are: ranges must be (1) non-empty, (2) disjoint,
(3) sorted in ascending order.
line_log_data_insert() breaks the non-empty invariant under the
following conditions: the incoming range is empty and the pathname
attached to the range has not yet been encountered. In this case,
line_log_data_insert() assigns the empty range to a new line_log_data
record without taking any action to ensure that the empty range is
eventually folded out. Subsequent range-set functions crash or throw an
assertion failure upon encountering such an anomaly. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-set invariants are: ranges must be (1) non-empty, (2) disjoint,
(3) sorted in ascending order.
During processing, various range-set utility functions break the
invariants (for instance, by adding empty ranges), with the
expectation that a finalizing sort_and_merge_range_set() will restore
sanity.
sort_and_merge_range_set(), however, neglects to fold out empty
ranges, thus it fails to satisfy the non-empty constraint. Subsequent
range-set functions crash or throw an assertion failure upon
encountering such an anomaly. Rectify the situation by having
sort_and_merge_range_set() fold out empty ranges.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4211: demonstrate crash when first -L encountered is empty range
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Helped-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Helped-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-set: fix sort_and_merge_range_set() corner case bug
When handed an empty range_set (range_set.nr == 0),
sort_and_merge_range_set() incorrectly sets range_set.nr to 1 at exit.
Subsequent range_set functions then access the bogus range at element
zero and crash or throw an assertion failure. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
open_istream: remove unneeded check for null pointer
'st' is allocated via xmalloc a few lines before and passed to
the stream opening functions.
The xmalloc function is written in a way that either 'st' is allocated
valid memory or xmalloc already dies.
The function calls to open_istream_* do not change 'st', as the pointer is
passed by reference and not a pointer of a pointer.
Hence 'st' cannot be null at that part of the code.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare two repositories, src and dst, the latter of which is a
clone of the former (with tracking branches), and push from the
latter into the former, with various --force-with-lease options.
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
push --force-with-lease: implement logic to populate old_sha1_expect[]
This plugs the push_cas_option data collected by the command line
option parser to the transport system with a new function
apply_push_cas(), which is called after match_push_refs() has
already been called.
At this point, we know which remote we are talking to, and what
remote refs we are going to update, so we can fill in the details
that may have been missing from the command line, such as
(1) what abbreviated refname the user gave us matches the actual
refname at the remote; and
(2) which remote-tracking branch in our local repository to read
the value of the object to expect at the remote.
to populate the old_sha1_expect[] field of each of the remote ref.
As stated in the documentation, the use of remote-tracking branch
as the default is a tentative one, and we may come up with a better
logic as we gain experience.
Still nobody uses this information, which is the topic of the next
patch.
remote.c: add command line option parser for "--force-with-lease"
Update "git push" and "git send-pack" to parse this commnd line
option.
The intended sematics is:
* "--force-with-lease" alone, without specifying the details, will
protect _all_ remote refs that are going to be updated by
requiring their current value to be the same as some reasonable
default, unless otherwise specified;
* "--force-with-lease=refname", without specifying the expected
value, will protect that refname, if it is going to be updated,
by requiring its current value to be the same as some reasonable
default.
* "--force-with-lease=refname:value" will protect that refname, if
it is going to be updated, by requiring its current value to be
the same as the specified value; and
* "--no-force-with-lease" will cancel all the previous --force-with-lease on the
command line.
For now, "some reasonable default" is tentatively defined as "the
value of the remote-tracking branch we have for the ref of the
remote being updated", and it is an error if we do not have such a
remote-tracking branch. But this is known to be fragile, its use is
not yet recommended, and hopefully we will find more reasonable
default as we gain experience with this feature. The manual marks
the feature as experimental unless the expected value is specified
explicitly for this reason.
Because the command line options are parsed _before_ we know which
remote we are pushing to, there needs further processing to the
parsed data after we instantiate the transport object to:
* expand "refname" given by the user to a full refname to be
matched with the list of "struct ref" used in match_push_refs()
and set_ref_status_for_push(); and
* learning the actual local ref that is the remote-tracking branch
for the specified remote ref.
Further, some processing need to be deferred until we find the set
of remote refs and match_push_refs() returns in order to find the
ones that need to be checked after explicit ones have been processed
for "--force-with-lease" (no specific details).
These post-processing will be the topic of the next patch.
This option was originally called "cas" (for "compare and swap"),
the name which nobody liked because it was too technical. The
second attempt called it "lockref" (because it is conceptually like
pushing after taking a lock) but the word "lock" was hated because
it implied that it may reject push by others, which is not the way
this option works. This round calls it "force-with-lease". You
assume you took the lease on the ref when you fetched to decide what
the rebased history should be, and you can push back only if the
lease has not been broken.
Corrects the longstanding sloppiness in the implementation of
name-rev that conflated "we take commit-ish" and "differences
between tags and commits do not matter".
* jc/name-rev-exact-ref:
describe: fix --contains when a tag is given as input
name-rev: differentiate between tags and commits they point at
describe: use argv-array
name-rev: allow converting the exact object name at the tip of a ref
name-ref: factor out name shortening logic from name_ref()
Newer Net::SMTP::SSL module does not want the user programs to use
the default behaviour to let server certificate go without
verification, so by default enable the verification with a
mechanism to turn it off if needed.
* rr/send-email-ssl-verify:
send-email: be explicit with SSL certificate verification
The early part to refactor relative path related helper functions
looked sensible.
* jx/clean-interactive:
test: run testcases with POSIX absolute paths on Windows
test: add t7301 for git-clean--interactive
git-clean: add documentation for interactive git-clean
git-clean: add ask each interactive action
git-clean: add select by numbers interactive action
git-clean: add filter by pattern interactive action
git-clean: use a git-add-interactive compatible UI
git-clean: add colors to interactive git-clean
git-clean: show items of del_list in columns
git-clean: add support for -i/--interactive
git-clean: refactor git-clean into two phases
write_name{_quoted_relative,}(): remove redundant parameters
quote_path_relative(): remove redundant parameter
quote.c: substitute path_relative with relative_path
path.c: refactor relative_path(), not only strip prefix
test: add test cases for relative_path
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
Use the function attributes extension to catch mistakes in use of
our own variadic functions that use NULL sentinel at the end
(i.e. like execl(3)) and format strings (i.e. like printf(3)).
* jk/gcc-function-attributes:
Add the LAST_ARG_MUST_BE_NULL macro
wt-status: use "format" function attribute for status_printf
use "sentinel" function attribute for variadic lists
add missing "format" function attributes