After refactoring __git_ps1_colorize_gitstring, codepaths for bash and zsh
became mostly common and tests for bash and zsh became redundant.
Remove tests for zsh. Keep one minimal test that stress the difference
in codepaths for bash and zsh.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1_colorize_gitstring() sets color codes and
builds the prompt gitstring. It has duplicated code
to handle color codes for bash and zsh shells.
__git_ps1() also has duplicated logic to build the
prompt gitstring.
Remove duplication of logic to build gitstring in
__git_ps1_colorize_gitstring() and __git_ps1().
Leave in __git_ps1_colorize_gitstring() only logic
to set color codes.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty: --format output should honor logOutputEncoding
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
pretty: Add failing tests: --format output should honor logOutputEncoding
One can set an alias
$ git config alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
test: run testcases with POSIX absolute paths on Windows
Some test cases are skipped on Windows by marking with POSIX prereq.
This is because arguments look like absolute paths (such as /a/b)
for regular Windows programs (*.exe executables, no bash scripts)
are changed to Windows paths (like C:/msysgit/a/b).
There is no cygpath nor equivalent on msysGit, but it is easy to
write one. New subcommand "mingw_path" is added in test-path-utils,
so that we can get the expected absolute paths on Windows. E.g.
COMMAND LINE Linux output Windows output
================================== ============ ===============
test-path-utils mingw_path / / C:/msysgit
test-path-utils mingw_path /a/b/ /a/b/ C:/msysgit/a/b/
With this utility, most skipped test cases in t0060 can be turned on
to be tested correctly on Windows.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean: add documentation for interactive git-clean
Add new section "Interactive mode" for documentation of interactive
git-clean.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new action for interactive git-clean: ask each. It's just like
the "rm -i" command, that the user must confirm one by one for each
file or directory to be cleaned.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean: add select by numbers interactive action
Draw a multiple choice menu using `list_and_choose` to select items
to be deleted by numbers.
User can input:
* 1,5-7 : select 1,5,6,7 items to be deleted
* * : select all items to be deleted
* -* : unselect all, nothing will be deleted
* : (empty) finish selecting, and return back to main menu
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean: add filter by pattern interactive action
Add a new action for interactive git-clean: filter by pattern. When the
user chooses this action, user can input space-separated patterns (the
same syntax as gitignore), and each clean candidate that matches with
one of the patterns will be excluded from cleaning. When the user feels
it's OK, presses ENTER and backs to the confirmation dialog.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean: use a git-add-interactive compatible UI
Rewrite menu using a new method `list_and_choose`, which is borrowed
from `git-add--interactive.perl`. We will use this framework to add
new actions for interactive git-clean later.
Please NOTE:
* Method `list_and_choose` return an array of integers, and
* it is up to you to free the allocated memory of the array.
* The array ends with EOF.
* If user pressed CTRL-D (i.e. EOF), no selection returned.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Show header, help, error messages, and prompt in colors for interactive
git-clean. Re-use config variables, such as "color.interactive" and
"color.interactive.<slot>" for command `git-add--interactive`.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Comments-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before introducing interactive git-clean, refactor git-clean operations
into two phases:
* hold cleaning items in del_list,
* and remove them in a separate loop at the end.
We will introduce interactive git-clean between the two phases. The
interactive git-clean will show what would be done and must confirm
before do real cleaning.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After substitute path_relative() in quote.c with relative_path()
from path.c, parameters (such as len and prefix_len) are redundant
in function write_name() and write_name_quoted_relative(). The
callers have already been audited that the strings they pass are
properly NUL terminated and the length they give are the length of
the string (or -1 that asks the length to be counted by the callee).
Remove these now-redundant parameters.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
quote_path_relative() used to take a counted string as its parameter
(the string to be quoted). With an earlier change, it now uses
relative_path() that does not take a counted string, and we have
been passing only the pointer to the string since then.
Remove the length parameter from quote_path_relative() to show that
this parameter was redundant. All the changed lines show that the
caller passed either -1 (to ask the function run strlen() on the
string), or the length of the string, so the earlier conversion was
safe.
All the callers of quote_path_relative() that used to take counted string
have been audited to make sure that they are passing length of the actual
string (or -1 to ask the callee run strlen())
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
quote.c: substitute path_relative with relative_path
Substitute the function path_relative in quote.c with the function
relative_path. Function relative_path can be treated as an enhanced
and more robust version of path_relative.
Outputs of path_relative and it's replacement (relative_path) are the
same for the following cases:
But if both of the path and the prefix are the same, or the returned
relative path should be the current directory, the outputs of both
functions are different. Function relative_path returns "./", while
function path_relative returns empty string.
But the callers of path_relative can handle such cases, or never
encounter this issue at all, because:
* In function quote_path_relative, if the output of path_relative is
empty, append "./" to it, like:
if (!out->len)
strbuf_addstr(out, "./");
* Another caller is write_name_quoted_relative, which is only used
by builtin/ls-files.c. git-ls-files only show files, so path of
files will never be identical with the prefix of a directory.
The following differences show that path_relative does not handle
extra slashes properly:
path prefix output of path_relative output of relative_path
======== ========= ======================= =======================
/a//b//c/ //a/b// ../../../../a//b//c/ c/
a/b//c a//b ../b//c c
And if prefix has no trailing slash, path_relative does not work
properly either. But since prefix always has a trailing slash, it's
not a problem.
One tricky part in this conversion is write_name() function in
ls-files.c. It takes a counted string, <name, len>, that is to be
made relative to <prefix, prefix_len> and then quoted. Because
write_name_quoted_relative() still takes these two parameters as
counted string, but ignores the count and treat these two as
NUL-terminated strings, this conversion needs to be audited for its
callers:
- For <name, len>, all three callers of write_name() passes a
NUL-terminated string and its true length, so this patch makes
"len" unused.
- For <prefix, prefix_len>, prefix could be a string that is longer
than empty while prefix_len could be 0 when "--full-name" option
is used. This is fixed by checking prefix_len in write_name()
and calling write_name_quoted_relative() with NULL when
prefix_len is set to 0. Again, this makes "prefix_len" given to
write_name_quoted_relative() unused, without introducing a bug.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
path.c: refactor relative_path(), not only strip prefix
Original design of relative_path() is simple, just strip the prefix
(*base) from the absolute path (*abs).
In most cases, we need a real relative path, such as: ../foo,
../../bar. That's why there is another reimplementation
(path_relative()) in quote.c.
Borrow some codes from path_relative() in quote.c to refactor
relative_path() in path.c, so that it could return real relative
path, and user can reuse this function without reimplementing
his/her own. The function path_relative() in quote.c will be
substituted, and I would use the new relative_path() function when
implementing the interactive git-clean later.
Different results for relative_path() before and after this refactor:
Add subcommand "relative_path" in test-path-utils, and add test cases
in t0060.
Johannes tested an earlier version of this patch on Windows, and
found that some relative_path tests should be skipped on
Windows. This is because the bash on Windows rewrites arguments of
regular Windows programs, such as git and the test helpers, if the
arguments look like absolute POSIX paths. As a consequence, the
actual tests performed are not what the tests scripts expect.
The tests that need *not* be skipped are those where the two paths passed
to 'test-path-utils relative_path' have the same prefix and the result is
expected to be a relative path. This is because the rewriting changes
"/a/b" to "D:/Src/MSysGit/a/b", and when both inputs are extended the same
way, this just cancels out in the relative path computation.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration option column.ui is very poorly documented, and it is
unclear what the defaults are, and what option can be combined with
what. Rewrite it by splitting up the options into three sections
clearly showing how COL_ENABLED, COL_LAYOUT_MASK, and COL_DENSE work.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
.mailmap: Map "H.Merijn Brand" to "H. Merijn Brand"
This patch was created by searching for duplicates of email addresses
in the shortlog by
git shortlog -sne |awk '{ print $NF }' |sort |uniq -d
This will yield all email addresses, which are found multiple times within
the shortlog. We can assume that commiters having the same email address
are indeed the same person.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "rebase --autostash" update made it impossible to recover
with "git am --abort" from a repository where "git am" without mbox
was run by mistake and then was killed with "^C".
* rr/am-quit-empty-then-abort-fix:
t/am: use test_path_is_missing() where appropriate
am: handle stray $dotest directory
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
Make it possible to call into copy-notes API from the sequencer code.
* jh/libify-note-handling:
Move create_notes_commit() from notes-merge.c into notes-utils.c
Move copy_note_for_rewrite + friends from builtin/notes.c to notes-utils.c
finish_copy_notes_for_rewrite(): Let caller provide commit message
status/commit: make sure --porcelain is not affected by user-facing config
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
With "status.short" set, it is now impossible to commit with
status.short set, because it acts like "git commit --short", and it
is impossible to differentiate between a status_format set by the
command-line option parser versus that set by the config parser.
To alleviate this problem, clear status_format as soon as the config
parser has finished its work.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup creates two bare repositories: repo1 and repo2, but
test_push_commit() hard-codes checking in repo1 for the actual output.
Generalize it and its caller, test_push_success(), to optionally accept
a third argument to specify the name of the repository to check for
actual output. We will use this in the next patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
push: change `simple` to accommodate triangular workflows
When remote.pushdefault or branch.<name>.pushremote is set to a
remote that is different from where you usually fetch from (i.e. a
triangular workflow), master@{u} != origin, and push.default is set
to `upstream` or `simple` would fail with this error:
$ git push
fatal: You are pushing to remote 'origin', which is not the upstream of
your current branch 'master', without telling me what to push
to update which remote branch.
The very name of "upstream" indicates that it is only suitable for
use in central workflows; let us not even attempt to give it a new
meaning in triangular workflows, and error out as before.
However, the `simple` does not have to share this error. It is
poised to be the default for Git 2.0, and we would like it to do
something sensible in triangular workflows.
Redefine "simple" as "safer upstream" for centralized workflow as
before, but work as "current" for triangular workflow.
We may want to make it "safer current", but that is a separate
issue.
Reported-by: Leandro Lucarella <leandro.lucarella@sociomantic.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash prompt: mention that PROMPT_COMMAND mode is faster
__git_ps1() is usually added to the prompt inside a command
substitution, imposing the overhead of fork()ing a subshell. Using
__git_ps1() for $PROMPT_COMMAND is slightly faster, because it avoids
that command substitution.
Mention this in the comments about setting up the git prompt.
The whole series speeds up the bash prompt on Windows/MSysGit
considerably. Here are some timing results in three scenarios, each
repeated 10 times:
At the top of the work tree, before:
$ time for i in {0..9} ; do prompt="$(__git_ps1)" ; done
real 0m1.716s
user 0m0.301s
sys 0m0.772s
After:
real 0m0.687s
user 0m0.075s
sys 0m0.396s
After, from $PROMPT_COMMAND:
$ time for i in {0..9} ; do __git_ps1 '\h:\w' '$ ' ; done
real 0m0.546s
user 0m0.075s
sys 0m0.181s
At the top of the work tree, detached head, before:
real 0m2.574s
user 0m0.376s
sys 0m1.207s
After:
real 0m1.139s
user 0m0.151s
sys 0m0.500s
After, from $PROMPT_COMMAND:
real 0m1.030s
user 0m0.245s
sys 0m0.336s
In a subdirectory, during rebase, stash status indicator enabled,
before:
real 0m3.557s
user 0m0.495s
sys 0m1.767s
After:
real 0m0.717s
user 0m0.120s
sys 0m0.300s
After, from $PROMPT_COMMAND:
real 0m0.577s
user 0m0.047s
sys 0m0.258s
On Linux the speedup ratio is comparable to Windows, but overall it
was about an order of magnitude faster to begin with. The last case
from above, repeated 100 times, before:
$ time for i in {0..99} ; do prompt="$(__git_ps1)" ; done
bash prompt: avoid command substitution when finalizing gitstring
Before setting $PS1, __git_ps1() uses a command substitution to
redirect the output from a printf into a variable. Spare the overhead
of fork()ing a subshell by using 'printf -v <var>' to directly assign
the output to that variable.
zsh's printf doesn't support the '-v <var>' option, so stick with the
command substitution when under zsh.
bash prompt: avoid command substitution when checking for untracked files
When enabled, the bash prompt can indicate the presence of untracked
files with a '%' sign. __git_ps1() checks for untracked files by running the
'$(git ls-files --others --exclude-standard)' command substitution,
and displays the indicator when there is no output.
Avoid this command substitution by additionally passing
'--error-unmatch *', and checking the command's return value.
bash prompt: use bash builtins to check stash state
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
bash prompt: use bash builtins to check for unborn branch for dirty state
When the dirty work tree and index status indicator is enabled,
__git_ps1() checks for changes in the index by running 'git diff-index
--cached --quiet HEAD --' and looking at its exit code. However, that
makes sense only when HEAD points to a valid commit: on an unborn
branch the failure of said command would be caused by the invalid
HEAD, not by changes in the index. Therefore, __git_ps1() first
checks for a valid HEAD by running 'git rev-parse --quiet --verify
HEAD'.
Since the previous patch we implicitly check HEAD's validity by
running 'git rev-parse ... --short HEAD', making the dirty status
indicator's 'git rev-parse' check redundant. It's sufficient to check
for non-emptyness of the variable holding the abbreviated commit
object name, thereby sparing the overhead of fork()+exec()ing a git
process.
bash prompt: combine 'git rev-parse' for detached head
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
bash prompt: combine 'git rev-parse' executions in the main code path
There are a couple of '$(git rev-parse --<opt>)' command substitutions
in __git_ps1() and three of them are executed in the main code path:
- the first to get the path to the .git directory ('--git-dir'),
- the second to check whether we're inside the .git directory
('--is-inside-git-dir'),
- and the last, depending on the results of the second, either
* to check whether it's a bare repo ('--is-bare-repository'), or
* to check whether inside a work tree ('--is-inside-work-tree').
Naturally, this imposes the overhead of fork()ing three subshells and
fork()+exec()ing three git commands.
Combine these four 'git rev-parse' queries into a single one and use
bash parameter expansions to parse the combined output, i.e. to
separate the path to the .git directory from the true/false of
'--is-inside-git-dir', etc. This way we can eliminate two of the
three subshells and git commands.
bash prompt: use bash builtins to find out current branch
__git_ps1() runs the '$(git symbolic-ref HEAD)' command substitution
to find out whether we are on a branch and to find out the name of
that branch. This imposes the overhead of fork()ing a subshell and
fork()+exec()ing a git process.
Since HEAD is in most cases a single-line file and the symbolic ref
format is quite simple to recognize and parse, read and parse it using
only bash builtins, thereby sparing all that fork()+exec() overhead.
Don't display the git prompt if reading HEAD fails, because a readable
HEAD is required for a git repository. HEAD can also be a symlink
symbolic ref (due to 'core.preferSymlinkRefs'), so use bash builtins
for reading HEAD only when HEAD is not a symlink.
bash prompt: use bash builtins to find out rebase state
During an ongoing interactive rebase __git_ps1() finds out the name of
the rebased branch, the total number of patches and the number of the
current patch by executing a '$(cat .git/rebase-merge/<FILE>)' command
substitution for each. That is not quite the most efficient way to
read single line single word files, because it imposes the overhead of
fork()ing a subshell and fork()+exec()ing 'cat' several times.
Use the 'read' bash builtin instead to avoid those overheads.
bash prompt: run 'git rev-parse --git-dir' directly instead of __gitdir()
__git_ps1() finds out the path to the repository by using the
__gitdir() helper function. __gitdir() is basically just a wrapper
around 'git rev-parse --git-dir', extended with support for
recognizing a remote repository given as argument, to use the path
given on the command line, and with a few shortcuts to recognize a git
repository in cwd or at $GIT_DIR quickly without actually running 'git
rev-parse'. However, the former two is only necessary for the
completion script but makes no sense for the bash prompt, while the
latter shortcuts are performance optimizations __git_ps1() can do
without (they just avoid the overhead of fork()+exec()ing a git
process).
Run 'git rev-parse --git-dir' directly in __git_ps1(), because it will
allow this patch series to combine several $(git rev-parse ...)
command substitutions in the main code path, and the overall
performance benefit will far outweigh the loss of those few shortcuts
in __gitdir(). Furthermore, since __gitdir() is not needed anymore
for the prompt, remove it from the prompt script finally eliminating
its duplication between the prompt and completion scripts. Also
remove the comment from the completion script warning about this code
duplication.
bash prompt: print unique detached HEAD abbreviated object name
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to
show the 7 hexdigits abbreviated commit object name in the prompt.
Obviously, this neither respects core.abbrev nor produces a unique
object name.
Fix this by using 'git rev-parse --short HEAD' instead and adjust the
corresponding test to use non-standard number of hexdigits.
completion, bash prompt: move __gitdir() tests to completion test suite
Currently __gitdir() is duplicated in the git completion and prompt
scripts, while its tests are in the prompt test suite. This patch
series is about to change __git_ps1() in a way that it won't need
__gitdir() anymore and __gitdir() will be removed from the prompt
script.
So move all __gitdir() tests from the prompt test suite over to the
completion test suite. Update the setup tests so that they perform
only those steps that are necessary for each test suite.
Now that the "checkout" invoked internally from "rebase -i" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase -i: checkout master
instead of the old
rebase -i
As all the calls git-rebase--interactive make to underlying git
commands that leave reflog messages are preceded by the internal
comment_for_reflog helper function, which uses the original value of
the GIT_REFLOG_ACTION variable it saw when it first started, the new
assignments to GIT_REFLOG_ACTION actively contaminate the value of
the variable, knowing that it will be reset to a sane value before
it is used again. This does not generally hold true but it should
suffice for now.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the "checkout" invoked internally from "rebase" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase: checkout master
instead of the old
rebase
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
4d35924e (Merge branch 'rr/triangle', 2013-04-07) introduced support
for triangular workflows, but the push.default values still assume
central workflows.
Rewrite the descriptions of `nothing`, `current`, `upstream` and
`matching` for greater clarity, and explicitly explain how they
should behave in triangular workflows.
Leave `simple` as it is for the moment, as we plan to change its
meaning to accommodate triangular workflows in a later patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase-tests:
rebase topology tests: fix commit names on case-insensitive file systems
tests: move test for rebase messages from t3400 to t3406
t3406: modernize style
add tests for rebasing merged history
add tests for rebasing root
add tests for rebasing of empty commits
add tests for rebasing with patch-equivalence present
add simple tests of consistency across rebase types
* jk/apache-test-for-2.4:
lib-httpd/apache.conf: check version only after mod_version loads
t/lib-httpd/apache.conf: configure an MPM module for apache 2.4
t/lib-httpd/apache.conf: load compat access module in apache 2.4
t/lib-httpd/apache.conf: load extra auth modules in apache 2.4
t/lib-httpd/apache.conf: do not use LockFile in apache >= 2.4
* cm/remote-mediawiki-perlcritique: (31 commits)
git-remote-mediawiki: make error message more precise
git-remote-mediawiki: add a perlcritic rule in Makefile
git-remote-mediawiki: add a .perlcriticrc file
git-remote-mediawiki: clearly rewrite double dereference
git-remote-mediawiki: fix a typo ("mediwiki" instead of "mediawiki")
git-remote-mediawiki: put non-trivial numeric values in constants.
git-remote-mediawiki: don't use quotes for empty strings
git-remote-mediawiki: replace "unless" statements with negated "if" statements
git-remote-mediawiki: brace file handles for print for more clarity
git-remote-mediawiki: modify strings for a better coding-style
git-remote-mediawiki: put long code into a subroutine
git-remote-mediawiki: remove import of unused open2
git-remote-mediawiki: check return value of open
git-remote-mediawiki: assign a variable as undef and make proper indentation
git-remote-mediawiki: rename a variable ($last) which has the name of a keyword
git-remote-mediawiki: remove unused variable $entry
git-remote-mediawiki: turn double-negated expressions into simple expressions
git-remote-mediawiki: change the name of a variable
git-remote-mediawiki: add newline in the end of die() error messages
git-remote-mediawiki: change style in a regexp
...
* rr/rebase-autostash:
rebase: finish_rebase() in noop rebase
rebase: finish_rebase() in fast-forward rebase
rebase: guard against missing files in read_basic_state()
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
add -i: add extra options at the right place in "diff" command line
Appending "--diff-algorithm=histogram" at the end of canned command
line for various modes of "diff" is correct for most of them but not
for "stash" that has a non-option already wired in, like so:
'stash' => {
DIFF => 'diff-index -p HEAD',
Appending an extra option after non-option may happen to work due to
overly lax command line parser, but that is not something we should
rely on. Instead, splice in the extra argument immediately after the
command name (i.e. 'diff-index', 'diff-files', etc.).
test-lib: support running tests under valgrind in parallel
With the new --valgrind-parallel=<n> option, we support running the
tests in a single test script under valgrind in parallel using 'n'
processes.
This really follows the dumbest approach possible, as follows:
* We spawn the test script 'n' times, using a throw-away
TEST_OUTPUT_DIRECTORY. Each of the instances is given options that
ensures that it only runs every n-th test under valgrind, but
together they cover the entire range.
* We add up the numbers from the individual tests, and provide the
usual output.
This is really a gross hack at this point, and should be improved. In
particular we should keep the actual outputs somewhere more easily
discoverable, and summarize them to the user.
Nevertheless, this is already workable and gives a speedup of more
than 2 on a dual-core (hyperthreaded) machine, using n=4. This is
expected since the overhead of valgrind is so big (on the order of 20x
under good conditions, and a large startup overhead at every git
invocation) that redundantly running the non-valgrind tests in between
is not that expensive.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: allow prefixing a custom string before "ok N" etc.
This is not really meant for external use, and thus not documented. It
allows the next commit to neatly distinguish between sub-tests and the
main run.
The format is intentionally not valid TAP. The use in the next commit
would not result in anything valid either way, and it seems better to
make it obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: valgrind for only tests matching a pattern
With the new --valgrind-only=<pattern> option, one can enable
--valgrind at a per-test granularity, exactly analogous to
--verbose-only from the previous commit.
The options are wired such that --valgrind implies --verbose (as
before), but --valgrind-only=<pattern> implies
--verbose-only=<pattern> unless --verbose is also in effect.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: verbose mode for only tests matching a pattern
With the new --verbose-only=<pattern> option, one can enable --verbose
at a per-test granularity. The pattern is matched against the test
number, e.g.
./t0000-basic.sh --verbose-only='2[0-2]'
to see only the full output of test 20-22, while showing the rest in the
one-liner format.
As suggested by Jeff King, this takes care to wrap the entire
test_expect_* block, but nothing else, in the verbose toggling. We
can use the test_start/end functions from the previous commit for the
purpose.
This is arguably not *too* useful on its own, but makes the next patch
easier to follow.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000 contains some light self-tests of test-lib.sh, but --verbose was
not covered. Add a test.
The only catch is that the presence of a test harness influences the
output (specifically, the presence of some empty lines). So we need
to unset TEST_HARNESS or set it to a known value. Leaving it unset
leads to spurious test failures in the final summary, which come from
the subtest. So we always set it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
user-manual: Update download size for Git and the kernel
They've grown since d19fbc3 (Documentation: add git user's manual,
2007-01-07) when the stats were initially added. I've rounded
download sizes up to the nearest multiple of ten MiB to decrease the
precision and give a bit of growing room. Exact sizes:
t/t5505-remote: test multiple push/pull in remotes-file
Extend the test "migrate a remote from named file in $GIT_DIR/remotes"
to test that multiple "Push:" and "Pull:" lines in the remotes-file
works as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the <repository> paragraph containing specific references to
$GIT_DIR/branches and "." with a generic urls-or-remotes paragraph
referencing the relevant sections in the git-fetch(1) manpage.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under the EXAMPLES section, there is one invocation on the git.git
repository that attempts to list the refs master, pu, and rc. The ref
rc does not exist in today's repository, so remove it. Among other
things, this example demonstrates that the "<refs>..." argument is
simply a filter; requesting a non-existent ref is not an error.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add one more test similar to "migrate a remote from named file in
$GIT_DIR/branches" to check that a url with a # can be used to specify
the branch name (as opposed to the constant "master").
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first line of the function checks that the remote-name contains a
slash ('/'), and sets the "slash" variable accordingly. The only caller
of read_branches_file() is remote_get_1(); the calling codepath is
guarded by valid_remote_nick(), which checks that the remote does not
contain a slash. Therefore, the "slash" variable can never be set:
remove the dead code that assumes otherwise.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t5505-remote: test push-refspec in branches-file
The test "migrate a remote from named file in $GIT_DIR/branches" reads
the branches-file, but only checks that the url and fetch-refspec are
set correctly. Check that the push-refspec is also set correctly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize the style of all tests throughout the file:
- Remove spurious blank lines.
- Indent the test body.
- Make sure that all lines end with &&, to make it easier to spot
breaks in the chain.
- When executing something in a subshell, put the parenthesis on
separate lines and indent the body. Also make sure that the
first statement in the subshell is a 'cd'.
- When redirecting input or output, do not use SP between
redirection operator and the target filename.
- Use the <<-\EOF and <<-EOF forms of heredoc, not <<EOF, when the
command is indented and the heredoc text itself does not have to
have a leading tab.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 3.x tree has been out for a while now. The -2.6 repository name
survived the initial release [1], but kernel.org now only lists
'linux.git' (for aegl as well as torvalds) [2].
[1]: http://article.gmane.org/gmane.linux.kernel/1147422
On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote:
> ... yes, that means that my git tree is still called
> "linux-2.6.git" on kernel.org.
[2]: http://git.kernel.org/cgit/
Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: Update the NFS remote examples to use the staging repo
linux-nfs.org seems to have restructured their repository layout since 8391c60 (git-remote.txt: fix example url, 2007-11-02), and Bruce's
repo is now at git://git.linux-nfs.org/projects/bfields/linux.git.
Bruce also has a more richer internal branch structure (master,
everything, for-3.1, ...), so updating the existing example to use his
current repo may be confusing.
To simplify, I've replaced the NFS repo with Greg's staging repo.
I've also updated the output of the surrounding commands to match the
output of a current run through.
Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc/clone: Pick more compelling paths for the --reference example
There may be times when using one of your local repositories as a
reference for a new clone make sense, but the implied version-bump in
the old example isn't one of them. I think a more intuitive example
is multi-user system with a central reference clone, and the new paths
hint at this use case.
Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
lib-httpd/apache.conf: check version only after mod_version loads
Commit 0442743 introduced an <IfVersion> directive near the
top of the apache config file. However, at that point we
have not yet checked for and loaded the mod_version module.
This means that the directive will behave oddly if
mod_version is dynamically loaded, failing to match when it
should.
We can fix this by moving the whole block below the
LoadModule directive for mod_version.
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the --topo/date-order test vector a bit and mark the author
dates of two commits (a2 and a3) earlier than their own committer
dates, making them much older than other commits that are made on
parallel branches to simulate the case where a long running topic
was rebased recently.
They will show up as recent in the --date-order output due to their
timestamps, but they appear a lot later in the --author-date-order
output, even though their committer timestamp says otherwise.